Description:
The Rhino PD-110 Pneumatic Post Driver combines easier handling than an equipment supported driver but has a slight advantage over the PD-55 in driving speed and heavy soil tolerance. Plus, the PD-110 provides better soil stabilization when driving the post at a deeper soil level is required. The PD-100 takes post driving capabilities to the next level. It is suited for driving 2″ to 4″ pipe and tube, structural forms, pin piles, dock piles, and 4×4 wood.
- At 109 pounds, with an Alloy Steel piston, the PD-110 provides better handling in tough sites.
- Delivering up to 930 blows per minute, and capable of driving a 2” post, ten to fifteen feet deep.
- No additional equipment required. Can be lifted by two people.
- Additional driving options possible with easy bolt-on adapters.
Specs:
| Duty | Heavy |
| Air Consumption (CFM@100 psi) | 64 |
| Wt. lb (kg) | 109.16 (49.5) |
| Master Chuck | "4 1/4" (107.9) ID" |
APPLICATIONS
| 1-1/4" to 1-1/2" Pipe | X● |
| 1-5/8" Round Post | X● |
| 2" Pipe | X● |
| 2-1/2" Pipe | X● |
| 3” Pipe | X●❖⧫ |
| 3-1/2" Pipe | X⧫ |
| 4” Pipe | X■❖⧫ |
| T-Posts | X● |
| Telespar Post | X● |
| Telespar Post Breakaway Anchor 2-1/2" | X●❖⧫ |
| 1.2 to 1.5 lbs/ft Channel Post | X● |
| 2 to 2.75 lbs/ft Channel Post | X● |
| 3 to 4 lbs/ft Channel Post | X● |
| Channel Post Breakaway Anchor | X●❖⧫ |
| C Post | X |
| 4” x 4” Wood Post | X■ |
| 4” x 6” H Column Guardrail Post | X■❖⧫ |
■ An optional master chuck is required
● An adapter is required
⧫ A driving cap is required
❖ Indicates a combination of accessories is required
Downloads:
See More From This Sales Category
See More From this Manufacturer
See More From This Eqp Category